Welcome to HLD Shelves Company. We provide customized storage shelving solutions and look forward to hearing from you.

Email

kennywong@hldshelves.com

WhatsApp

+86 13503052379

Warehouse Storage Racking | HLD Shelves
Warehouse Storage Racking

Engineered around your pallet dimensions, per-level load capacity, and clear height.

Mezzanine Rack System

Mezzanine Rack System is to build an intermediate loft on the existing work site or shelf to increase the storage space. It can be made into a two- or three-story loft.
Send Inquiry

Specifications

Figures below are the standard range for this system. Final values are confirmed per project after pallet sizes, load per pallet and clear height are reviewed.

Design basisEN 15512 structural principles, FEM 10.2.02; load capacity verified per project
Description
Products Description

Mezzanine Rack System is to build an intermediate loft on the existing work site or shelf to increase the storage space. It can be made into a two- or three-story loft.It is suitable for storing and retrieving some light and small and medium-sized goods.It is suitable for multi-variety large-volume or multi-variety small-volume goods.The goods are usually delivered to the second and third floors by forklifts, hydraulic lifts or freight elevators,and then delivered to a certain storage location by light trolleys or hydraulic pallet trucks.

Mezzanine Rack System


Product Parameters

Model NO.M106
Structurerack
TypeMulti-Level RackingMobilityAdjustable
Height0-5mWeight150-500kg
ClosedSemi-closedDevelopmentConventional
ServiceabilityCommon UseTransport PackagePacked in Bundles on Pallets and Wraped in Film
Specification upright 1.5mm, shelves 0.8mmTrademarkHLD
OriginGuangdong, ChinaHS Code7308900000


Key Features:

1. Space Optimization: Mezzanine Rack System makes use of vertical space in a warehouse, allowing businesses to store more goods without expanding the building's footprint.

2. Versatility: It can be used for additional storage, office space, assembly areas, or even as walkways for easy access to higher-level shelves and equipment.

3. Customizable: Mezzanine Rack System can be designed and built to suit specific needs, with features such as shelving, conveyors, or equipment for materials handling.

4. Cost-Effective: Building a mezzanine is typically more cost-effective than expanding or moving to a larger facility, as it makes use of existing infrastructure.

5. Safety Features: Mezzanine Rack System are typically equipped with guardrails, stairs, or lifts to ensure the safety of employees who work or move around the elevated levels.


Mezzanine Rack System


Mezzanine Rack System


Types of Mezzanine Rack System:

1.Structural Steel Mezzanine: These are strong, durable platforms made from steel that can support heavy loads.

2.Rack Supported Mezzanine: This type integrates the storage racks with the mezzanine platform, providing additional support.

3.Free-Standing Mezzanine: A completely independent structure that does not rely on the building for support, but instead stands on its own base.

Frequently asked questions

What load can each level carry?

Capacity is engineered per project, because it depends on the beam span, the upright section and how the pallet sits on the beams. For this product range the standard figure is 500–4,000 kg per level; anything outside that range is calculated case by case. Send us the pallet size and load per pallet and we will confirm the figure for your bay.

Can beam levels be adjusted after installation?

Yes. Beams sit in punched slots along the upright, normally on a 50 mm pitch, so a level can be moved without replacing the frame. The load rating has to be re-checked against the new span before the level is reloaded — never change a beam position without confirming the capacity for that configuration.

Which standards is the system designed to?

Design follows the principles of EN 15512 (steel static design) and FEM 10.2.02, with tolerances and clearances taken from EN 15620 and inspection/maintenance guidance from EN 15635. For North American projects we work to RMI/ANSI MH16.1. Load capacities are verified for each project rather than published as a single blanket rating.

Do you provide layout drawings and load calculations?

Yes. Send the floor plan (or just overall dimensions), pallet size, load per pallet, required number of positions and available clear height. We return a 2D layout, a 3D view and a beam load table with the quotation, so you can check the design before ordering.

What is the lead time and how is it shipped?

Standard bays are produced in about 15–25 days after drawing approval; large multi-phase projects are scheduled by delivery phase. Racking ships knock-down in containers, FOB or CIF, with marked bundles, installation drawings and an anchor bolt plan included.

Can the racking be extended later?

Yes. It is a bolted modular system: new bays can be added at either end of a row, and existing uprights accept additional beam levels. Expansion keeps the same upright and beam sections, so the added structure matches the original installation.

Designed & manufactured to
  • EN 15512
  • FEM 10.2.02
  • RMI / ANSI MH16.1
  • EN 15635 inspection
  • ISO 9001:2015

Need this system sized for your warehouse?

Send pallet size, load per pallet and clear height — we reply with a layout, a load table and a price.

whatsapp

Email

Inquiry

Send the bay size, the load per level and the destination port — a layout and a budget price come back on the same thread.