Welcome to HLD Shelves Company. We provide customized storage shelving solutions and look forward to hearing from you.

Comparison guide

Pallet Racking Systems Compared: 7 Types Side by Side

Seven systems at a glance

Swipe horizontally to see every column →

System Best for Density Load capacity Picking
Selective pallet rackingMixed SKUs, fast-moving goodsLow – medium (about 35%)500–4,000 kg per level100% direct access
Radio shuttle rackingLarge batches, low SKU countVery high (about 80%)1,000–1,500 kg per palletSemi-automatic
Drive-in rackingOne SKU per lane, bulk storageHigh (about 65%)500–1,500 kg per levelLIFO, no direct access
Double deep rackingFewer SKUs, density over speedMedium – high (about 50%)500–1,500 kg per levelLIFO, 50% selectivity
Four-way shuttle rackingMany SKUs, flexible high-density storageVery high (about 85%)500–1,500 kg per palletSemi-automatic, any-position access
Narrow aisle rackingFull warehouses, usable height above 9 mMedium – high (about 50%)500–1,500 kg per levelVNA truck access
Mezzanine floorSmall parts, manual pickingMedium (adds a usable floor)300–1,000 kg per m²Multi-level manual

Load figures are typical ranges for each system. Final capacity, bay dimensions and density depend on your pallet size, clear height and handling equipment — every quotation starts with a load calculation and layout drawing.

How to read this comparison

The table above compares seven systems on the four variables that decide a layout.Use it to shortlist two or three options,not to pick a final specification.The load figures are typical ranges;the section,beam and upright specification for your project come from a calculation based on your pallet weight,clear height and handling equipment.

Density is not the same as throughput

Drive-in,double deep and shuttle systems store more pallets in the same footprint,but they change how a warehouse moves.Drive-in is LIFO,so the deepest pallet waits until the lane is emptied from the front.Shuttle systems add semi-automatic handling and need a different operating discipline.A higher density figure only helps if your inbound and outbound rhythm can work with it.

Direct access costs structure,not just money

Selective racking gives 100%direct access,which is why it remains the default for mixed SKUs and fast picking.Every pallet position is reachable without moving another one.That matters more than density when your order profile changes week to week.

Small parts are a different problem

Mezzanine floors are not a pallet storage system. They add a usable level for manual, small-parts picking. If your operation is case or each-picking rather than full-pallet movement, comparing mezzanines against shuttle racking on density alone will give the wrong answer.

Common combinations

Most warehouses do not use one system everywhere. A frequent pattern is selective racking near the dispatch area for fast-moving SKUs, with drive-in or shuttle racking in the back for bulk reserve storage. Very narrow aisle racking is often paired with a mezzanine level for small-parts picking. See how this was applied in a real automotive plant project combining VNA racking and a mezzanine.

Questions we are asked most

Can I mix different systems in one warehouse?

Yes, and it is often the right answer. Separation is usually by picking speed and SKU profile: fast, mixed SKUs near the dock; bulk, single-SKU reserve in a dense system at the back.

Which system is the cheapest to install?

It depends on what you are comparing. Selective racking has the simplest structure, but a denser system can cost less per pallet position once land and building height are counted. A figure without your load and layout data would not be meaningful.

Are the load ranges in the table guaranteed?

No. They are typical industry ranges to help you shortlist. Final capacity is calculated per level from your pallet weight, bay width, clear height and safety requirements, and is stated on the drawing we send with the quotation.

What should I send you to get a real comparison?

Pallet dimensions and loaded weight, clear height, floor area, SKU count and how you pick. With those, we return a layout drawing and a load calculation rather than a catalogue answer. Send the data here.

Go deeper

Not sure which system fits?

Send us your pallet size, SKU count and clear height. We will come back with a load calculation and a layout drawing, not a catalogue price.

Request a layout & quote

whatsapp

Email

Inquiry

Send the bay size, the load per level and the destination port — a layout and a budget price come back on the same thread.