Warehouse Racking Purchasing Guide: From Pallet Data to Acceptance
The seven steps of a racking project
- Collect the input data
Pallet dimensions and loaded weight, clear height, floor area, aisle constraints, SKU count and picking method. These are the inputs for everything that follows. If you do not have all of them yet, send what you have — we will ask for the rest.
- Choose the system type
Use the selection guide to narrow to two or three candidates, then compare them in the seven-system table. The decision is driven by SKU profile, density target and picking method, not by price alone.
- Layout drawing and load calculation
Every quotation starts here. We calculate upright and beam specification from your pallet load and clear height, then draw the layout with aisles, bay positions and handling routes. This is the stage that prevents most costly mistakes.
- Quotation and specification review
Review the rack specification, coating, quantities and scope together with the drawing. Ask what is included and what is not — transport, installation and site preparation are separate line items. See what drives cost.
- Production and quality control
Components are produced to the approved drawing. Check that the delivered profile, thickness and coating match the agreed specification, not just the visual appearance.
- Installation
Follow the approved layout. Check floor condition, anchoring, upright plumb and beam locking before loading. Site access and installation conditions should be confirmed in advance.
- Acceptance and handover
Compare the installed rack against the drawing, verify load signage and safety accessories, and keep the drawing and specification on file for future changes.
Prepare this before step one
You do not need a complete specification to start, but four pieces of information make the first exchange useful: pallet dimensions, loaded weight, clear height and the number of SKUs you store. Floor area and any column or door obstacles help too. If some are missing, send what you have and we will ask for the rest.
What happens at each stage
Layout and load calculation. We calculate the section and beam specification from your data and draw the aisles, bay positions and handling routes. This is the stage that prevents most costly errors, so review the drawing carefully before anything is produced.
Quotation review. Check that the specification, coating, quantities and scope match the drawing. Confirm what is included for transport, installation and site preparation.
Production. Components are made to the approved drawing. Verify that delivered profiles, thickness and coating match the agreed specification, not just the visual appearance.
Installation and handover. Keep the drawing and specification on file. They are the reference for future changes, inspections and insurance.
Acceptance checklist
Installed layout matches the approved drawing: bay positions, aisle widths and orientations.
Uprights are plumb and beams are correctly seated and locked.
Anchoring is complete and floor condition is acceptable.
Load signs and safety accessories are in place and legible.
Coating and component specification match the quotation.
The drawing, calculation and specification are handed over in a usable format.
What should I check before signing off the drawing?
Check the pallet dimensions and weight used in the calculation, the clear height, the number of levels and the aisle width against the equipment that will actually operate there. Most layout problems start with one of those being slightly wrong.
Do I need to be present during installation?
Someone who can confirm site access, floor condition and the approved layout should be available at key points. It does not need to be a full-time presence, but it avoids decisions being made on site without reference to the drawing.
Can I change the system later?
Yes, if it is planned. Tell us about expected growth at the drawing stage and we can phase the layout so later extensions fit the original structure.
Ready to start? Send your pallet data and we will return a layout drawing and a load calculation.
Related reading
Start with step one
Send your pallet size, SKU count and clear height. We will come back with a load calculation and a layout drawing.
Request a layout & quote